Build a Tabletop Game Wheel

Build Instructions

Assemble: Demispider Wedge Puller (x1)

DEMISPIDER-DBL

Items Needed

Parts

Part IDPart NameQty PerTotal Qty (for 1)
DEMISHELL-DBLDemispider Shell11
MAG-1025Neodymium Magnet 3/8" x 1"44

Supplies

Part IDPart NameQty PerTotal Qty (for 1)
TDSCMasking Tape Discs44
TAPE-0034Masking Tape (3/4 in x 60yd)8 in8 in

Tools

Part IDPart Name
MAGNETJIG-DBLMagnet Jig, Dark Blue

Instructions

  1. Place the MAGNET-JIG in "WHEEL UP" position.
  2. Place each Magnet (MAG-1025) in turn on the MAGNET JIG to determine the correct polarity. Use a Tape Dot (TDSC) to mark the end of the magnet that faces up.
  3. Wrap each Magnet in a layer of 3/4" masking tape until the fit into the feet of the Demispider Shell is tight.
  4. Insert each Magnet, tape dot end first, into a leg of the Demispider. Ensure one final time that polarity is correct, and then push the magnet all of the way in until it is flush with the bottom of the leg.

Back to Build Instructions

Last updated: 5/18/2024 18:05:38