Build a Tabletop Game Wheel

Build Instructions

Fabricate: Player Spacer Cap, Black (x12)

PLAYERCAPSPACER-BLK

Items Needed

Materials

Part IDPart NameQty PerTotal Qty (for 12)
PETG-BLKPETG Filament, Black0.003 kg0.036 kg

Supplies

Part IDPart NameQty PerTotal Qty (for 12)
TAPE-03Painter's Tape, 3in Wide (per inch)14 in168 in

Tools

Part IDPart Name
PRINT-NOZZLE-063D Printer Nozzle, 0.6mm
PRINTER-3D3D Printer, 300mm or Larger Print Bed
PUTTY-KNIFE-150Putty Knife, 1.5 Inch
FLUSH-CUTTER-600Flush Cutters, 6 Inch

3D Printing Information

Download Model File FW_PlayerCapSpacer.stl

Download Project File CCR10S_FW_PlayerCapSpacer.3mf

Approximate Print Time: 10m (each)
Total: 2h 0m (12)

Recommended Print Settings

  • Nozzle Diameter: 0.6mm
  • Layer Height: 0.3mm
  • Initial Layer Height: 0.3mm
  • Z Seam Position: Front Right
  • Top Layers: 4
  • Bottom Layers: 4
  • Infill Pattern: Gyroid
  • Infill Density: 20%
  • Connect Infill Lines: Yes
  • Print Temperature: 250C
  • Build Plate Temperature: 80C
  • Flow: 100%
  • Initial Layer Flow: 85%
  • Print Speed: 40mm/s
  • Wall Speed: 40mm/s
  • Top/Bottom Speed: 40mm/s
  • Initial Layer Speed: 30mm/s
  • Number of Slower Layers: 1
  • Enable Print Cooling: No
  • Build Plate Adhesion: Brim

Instructions

  1. Print the model using the above settings as a guideline.
  2. Once the print completes, carefully remove the model from the build plate by removing the tape from beneath it. The model should pop off fairly easily. If not, use the putty knife to work beneath the tape and free the model. Use caution and go slow, putty knives are sharp!
  3. Remove brim, avoiding use of flush cutters as a first resort. Work the brim from sharper corners, attempting to score the brim at the base of the print. When using flush cutters to clean up remaining brim, try to grab, lift and pull the brim away from the model rather than snipping with the cutters. This will result in smoother edges. Remember that ideally you want the brim to separate from the print at their seam.

Back to Build Instructions

Last updated: 5/18/2024 18:05:38